Stephen Regenold

Gear Junkie

The call of the winter wilds beckoning skiers beyond resort boundaries is a top trend in the alpine world. At areas throughout the West, boundary gates are now kept open as policy all season long, letting skiers and snowboarders ride a lift uphill before ducking out of bounds and off the map to schuss and explore - at their own risk - terrain heretofore vastly inaccessible or remote.

Gear has evolved in the ski industry to cater to this new set of adventurers, with alpine equipment makers adding touches to allow skiers options for easier travel in bounds or out.

This season I've been testing gear to allow for solid performance going down the mountain - as well as back up. One slick ski-gear package includes Black Diamond Kilowatt skis, Fritschi Diamir Freeride Plus bindings, SCARPA Spirit 4 boots, as well as climbing skins for the bottom of the skis and adjustable poles.

At first glance, none of this equipment appears exotic. For example, SCARPA's Spirit 4 boots ($669, {M7www.scarpa.com) have four buckles to cinch tight on the foot and look like downhill gear. But these AT (alpine touring) boots are significantly lighter weight than their downhill cousins. Plus, SCARPA built in a switch to enable a "walk" mode, which unhinges the rigid forward lean so the boots become more supple for cross-country and uphill travel with a free-heel.

How do you obtain a free-heel with a downhill-type setup? Look at bindings like Fritschi's Diamir Freeride Plus ($425, {M7www.bdel.com), which clamp the heel in for the descent but can convert at the flick of a switch to enable a free-heel mode. For climbing up-mountain with skins, your boots stay set in the bindings as normal, though the foot is freed to lift off the ski, hinging on the tow piece to allow for striding.

Black Diamond's Kilowatt skis ($539, {M7www.bdel.com) are powerful in deep snow and crud, though they work fine inbounds on groomed trails, too. They have a slight hourglass shape, measuring 127mm (tip) x 95mm(mid) x 112mm (tail). I picked the 185cm model for length.

On my test run last month in Utah, where I skied the 5,000-vertical-foot "Banana Chute" on Mount Ogden in Utah, this package of equipment performed nearly as well as my traditional downhill setup could.

The Kilowatts felt as stable as anything I've skied for carving on the breakable wind-slab of the steep upper chute. Then down lower, where the powder got deep, the skis bobbed and zigzagged and floated almost effortlessly through the fluff.

The boots - which weigh about 4 pounds apiece - took more getting used to, as they are fairly flexible for anyone raised on downhill equipment. But in the Banana Chute I never felt compromised.

Finally, Fritschi's Freeride bindings were strong and solid in any type of terrain, with a maximum DIN setting of 12. They never budged when locked down.

The Fritschi bindings do put you slightly higher on the ski than some alpine bindings, which takes a few turns to figure out. After that, you'll be comfortable and confident with this setup, free to ski anything you regularly would be going down.